PO Box 6218 Colorado Springs, CO 80934 / Sales@CascadeEngineering.com
P: 719-684-8168 F: 719-684-9615
Print This Page / Close Window
PO
Box 6218
Colorado Springs, CO 80934 /
Sales@CascadeEngineering.com
P: 719-684-8168 F: 719-684-9615
Print This Page
/
Close Window
| Rated flow | 25 gpm (36000 gpd) | ||||||||||
| Principle of operation | Oily water separation to 15 ppm via enhanced gravity and large coalescer bed. | ||||||||||
| Capacity | Oils with up to .96 specific gravity, 0 to 100% concentration. Temperature 33 to 120F degrees ambient. | ||||||||||
| Suction | 25 ft. maximum vertical suction lift, less than 15 ft recommended. | ||||||||||
| Discharge pressure | 50 psi at 25 gpm. | ||||||||||
| Oil | 30 ft. maximum vertical discharge, 6 gal. approximate per batch. | ||||||||||
| Tank construction | Stainless steel 305, continuously welded. | ||||||||||
| Internals | Dual, large coalescer bed, polypropylene beads. | ||||||||||
| Electrical requirement | 208-230 VAC, 60 Hz, 3 phase. 15 amp protected circuit reqd. | ||||||||||
| Pump | Model 356 progressive cavity pump. | ||||||||||
| Motor | 2 hp, 1750 rpm, 3 phase TEFC Industrial Type | ||||||||||
| Valves | Bronze solenoid, gate, pressure relief (30 psi) | ||||||||||
| Pipe | Brass with NPT threads. | ||||||||||
| Controls | JIC enclosure, dielectric interface sensor with 2 tip sensitive probes. | ||||||||||
| Connection sizes |
|
||||||||||
| Overall dimensions | Less than 40" x 40" x 45" tall | ||||||||||
| Weight |
|
||||||||||