|
APT-4-P OILY WATER SEPARATOR SPECIFICATIONS
|
| Rated flow |
4 gpm (5800 gpd) |
| Principle of operation |
Oily water separation to 15 ppm via enhanced
gravity and large coalescer bed. |
| Capacity |
Oils with up to .96 specific gravity, 0 to
100% concentration. Temperature 33 to 120F degrees ambient. |
| Suction |
25 ft. maximum vertical suction lift, less
than 15 ft recommended. |
| Discharge pressure |
15 psi at 4 gpm, 50 psi maximum at 2 gpm. |
| Oil |
30 ft. maximum vertical discharge, 3 gal.
approximate per batch. |
| Tank construction |
PVC material, continuously welded. |
| Internals |
Single, large coalescer bed, polypropylene
beads. |
| Electrical requirement |
115 VAC, 60 Hz, 1 phase. 15 amp protected
circuit reqd. |
| Pump |
Model 332 progressive cavity pump. |
| Motor |
1/2 hp, 1750 rpm, TEFC |
| Valves |
Bronze solenoid, gate, pressure relief (30
psi) |
| Pipe |
Brass with NPT threads. |
| Controls |
JIC enclosure, dielectric interface sensor
with 2 tip sensitive probes. |
| Connection sizes |
|
Inlet |
1 1/4 NPT |
|
Backflush recirculate |
3/4
NPT |
| Oil
Discharge |
3/4
NPT |
|
Blackflush inlet |
3/4
NPT |
|
Blackflush water |
30
psi maximum |
|
| Overall dimensions |
Less than 27" x 27" x 40" tall |
| Weight |
| Dry |
270
lbs. |
| Wet |
360
lbs. |
|