PO Box 6218 Colorado Springs, CO 80934 / Sales@CascadeEngineering.com
P: 719-684-8168 F: 719-684-9615


Print This Page / Close Window

 APT-4-SS OILY WATER SEPARATOR SPECIFICATIONS

Rated flow 4 gpm (5800 gpd)
Principle of operation Oily water separation to 15 ppm via enhanced gravity and large coalescer bed.
Capacity Oils with up to .96 specific gravity, 0 to 100% concentration. Temperature 33 to 120F degrees ambient.
Suction 25 ft. maximum vertical suction lift, less than 15 ft recommended.
Discharge pressure 15 psi at 4 gpm, 50 psi maximum at 2 gpm.
Oil 30 ft. maximum vertical discharge, 3 gal. approximate per batch.
Tank construction Stainless steel 305, continuously welded.
Internals Single, large coalescer bed, polypropylene beads.
Electrical requirement 115 VAC, 60 Hz, 1 phase. 15 amp protected circuit reqd.
Pump Model 332 progressive cavity pump.
Motor 1/2 hp, 1750 rpm, TEFC
Valves Bronze solenoid, gate, pressure relief (30 psi)
Pipe Brass with NPT threads.
Controls JIC enclosure, dielectric interface sensor with 2 tip sensitive probes.
Connection sizes
Inlet 1 1/4 NPT
Backflush recirculate 3/4 NPT
Oil Discharge 3/4 NPT
Blackflush inlet 3/4 NPT
Blackflush water 30 psi maximum
Overall dimensions Less than 27" x 27" x 40" tall
Weight
Dry 270 lbs.
Wet 360 lbs.