PO
Box 6218
Colorado Springs, CO 80934
P: 719-684-8168
F: 719-684-9615
WRS Information Menu
WRS 12 and 12+
WRS 32
WRS 52
Back to Main Menu
© 2009
Cascade Engineering Inc.
|
WRS 42 WATER RECYCLE SYSTEM

The WRS 42 Recycle System is designed to solve washwater
disposal problems for the high volume user. This extra high capacity COMPLETELY
AUTOMATIC TREATMENT UNIT will collect dirty, oily washwater and
process it so that it can be reused in the washing operation. The
recycle feed pump transfers the dirty water from a collection sump to
the treatment unit. Reagents are automatically added to the water to
kill bacteria and odors, neutralize the pH, and remove pollutants such
as oil, grease, dirt, and sludge. These reagents, which are commonly
used in drinking water treatment, actually make the water much more ENVIRONMENTALLY
FRIENDLY and less hazardous for personnel doing the washing. The
treated water is then stored until needed for washing.
The WRS 42 treats up to 12 gpm (18000 gpd), which is plenty
for even very large washing operations. This unit is equipped with many
convenience features, including automatic priming valves for the reagent
pumps, integral water storage tank, and filters status pressure gage. It
comes completely assembled and wired, ready to be set in place and
plugged into a 15 amp, 115 volt outlet. The water discharge from the
integral storage tank is pressurized to feed your pressure washers, even
if they are remotely located. Premium components and quality
construction insure the most troublefree operation possible.
WRS 42 WATER RECYCLE SYSTEM SPECIFICATIONS
|
Rated flow rate: |
Up to 12 gpm (18000 gpd) |
| Electrical requirement: |
115 VAC, 60 Hz, 1 phase, 15 amp total |
| Recycle feed pump: |
Self priming centrifugal cast iron pump with 1/2
HP thermally protected motor. Mounted on the machine base.
Controlled by float switch in collection pit. Suction line
strainer and foot valve are provided. |
| Discharge pump: |
High head centrifugal pump with1/2 HP thermally
protected motor. Provides pressurized water flow to pressure
washer and other uses. |
| Electrical controls: |
GFCI provided, prewired with 15 amp plug, 10 ft
cord Lighted switches for power, feed pump, coagulant pump,
oxidizer pump, pH adjuster pump, makeup water, and manual drain.
pH controller with digital display. NEMA 4 rated enclosure |
| Reagent metering pumps: |
Electronic controlled diaphragm pumps with stroke
rate and stroke length controls and automatic degassing head for
ease of priming. Three pumps are supplied, for coagulant,
oxidizer, and pH adjuster. Pumps are mounted in a fiberglass
enclosure. |
| Inlet strainer: |
Large size with stainless steel screen in
corrosion resistant plastic housing. |
| Filter system: |
Two 20" long 20 micron filter cartridges for
final polishing. Two sets included. |
| Sludge collection system: |
Three large, disposable fabric socks collect
sludge. Two sets included with machine. |
| Make up water: |
100 psi maximum pressure. Automatically added as
required by application. |
| Recycle tank capacities: |
Coagulant tank- 150 gallons
Separator tank- 180 gallons
Storage tank- 150 gallons
Total water capacity- 480 gallons
|
| Recycle construction: |
Heavy duty polypropylene tank with unitized
construction. Schedule 80 PVC pipe used throughout. Heavy steel
base assembly. |
| Connection sizes: |
Machine inlet- 1 1/2 MNPT
Treated water outlet- 3/4 FNPT
Drain line- 1 FNPT
Make up water- 1/2 FNPT
|
| Overall dimensions: |
8 ft 0 in long, 3 ft 8 in deep, 4 ft 3 in tall |
| Shipping weight: |
900 pounds |
| Options: |
Second pH adjusting pump system. Additional
treated water storage capacity. Sand filter final polishing
system. Activated carbon water polishing systems. |
|
|
|